+1-403-630-4233

Commercial glass door repair or install in Calgary

7 money burning mistakes about commercial aluminum doors.

We have replaced hundreds if not thousands of aluminum storefronts and after thousands of dollars of trial and error discovered 7 things which can burn your money on a storefront project.

1. Thermal Bridging & Condensation Risks

Upgrade outdated, drafty windows with modern vinyl or aluminum frames. We ensure a weather-tight seal that locks in heat and blocks out moisture.

2. Rigorous Structural & Wind-Load Engineering

Break-ins, severe weather, or accidental impacts happen. Our 24/7 emergency response team in Calgary secures your home immediately with professional glass repair or secure temporary board-ups.

3. Precision Installation Tolerances

Transform dark, cramped basement windows into safe, code-compliant emergency exits. Perfect for finished basements, legal suites, and enhanced natural light.

4. Weatherstripping and Air Sealing Failures

Stop water from pooling against your basement glass. We install and seal heavy-duty window wells and drainage channels to keep your foundation bone-dry.

5. Hardware Durability & Heavy-Duty Usage

Stop water from pooling against your basement glass. We install and seal heavy-duty window wells and drainage channels to keep your foundation bone-dry.

6. Code Compliance & Safety Glazing Requirements

Stop water from pooling against your basement glass. We install and seal heavy-duty window wells and drainage channels to keep your foundation bone-dry.

7. Warranties and Post-Installation Maintenance

Stop water from pooling against your basement glass. We install and seal heavy-duty window wells and drainage channels to keep your foundation bone-dry.

Boots on ground: See Our Work: Real storefront Projects

We don't use stock photos. Explore our actual job sites across Calgary showcasing our precision installation, clean cuts, and durable weatherproofing.

aluminum storefront aluminum storefront aluminum storefront aluminum storefront

Why is there so much condensation (or frost) on the inside of my aluminum glass door in the winter?

Aluminum is a highly conductive metal. In freezing weather, standard aluminum frames transfer the freezing outside temperatures indoors. When your warm, humid indoor air hits the cold metal frame, it instantly creates condensation. To permanently solve this in cold climates, your door frame must have a "thermal break" (an internal insulated barrier that stops cold transfer) and high-quality weatherstripping to block drafts.

My commercial glass door is dragging on the floor and won't latch. Do I need to replace the whole door?

Usually, no. Door dragging and latch failures are incredibly common and are generally caused by the door sagging under the heavy weight of the glass. This typically stems from worn top or bottom pivot hinges, or a frame that has settled out of square. A technician can often fix this by adjusting the pivot height, shimming the hinges, or replacing the worn pivot hardware to re-align the door with the strike plate.

Why is my storefront door slamming shut violently instead of closing softly?

Your door relies on a hydraulic closer mounted at the top to regulate its swing speed. If the door is slamming, one of two things has happened: either the speed adjustment valves have vibrated loose over time, or the hydraulic fluid has leaked out. If the closer is leaking oil, it cannot be adjusted and must be completely replaced. Never ignore a slamming door, as the repeated impact will eventually shatter the glass or severely damage the frame.

I feel a massive cold draft coming from the bottom of my aluminum door. How do I fix this?

Drafts at the threshold are usually the result of a worn, compressed, or torn door sweep. The rubber, vinyl, or brush seal at the bottom of the door degrades from constant friction against the floor. Replacing the bottom sweep and ensuring the door is vertically aligned so the seal makes full contact with the threshold will easily stop the draft and prevent water from blowing in during storms.

Can I upgrade my current commercial aluminum door with heavier impact or triple-pane glass?

Yes, but you must upgrade your hardware at the same time. Impact or multi-pane glass is significantly heavier than standard commercial glazing. If you install heavier glass but leave the standard-duty pivot hinges and door closer in place, the hardware will quickly fail under the extra weight, causing the door to sag. Always specify heavy-duty, weight-rated closers and hinges when upgrading glass.

What happens if I ignore a minor alignment issue or a door that "sticks" a little bit?

Small alignment shifts create a rapid domino effect. A misaligned door forces the closer to work harder, grinds the bottom of the door against the threshold, and repeatedly bashes the latch into the strike plate rather than sliding into the pocket. Over time, this accelerates hardware failure and can even cause the structural frame to warp or the glass panels to break. Fixing a small sag or sticking issue early will save you from an expensive full-door replacement down the road.

Have a project in mind?
Get a free Quote now!

GET A QUOTE

OUR SERVICES

COMMMERCIAL
RESIDENTIAL
HIGH RISE
INDUSTRIAL
INSTITUTIONAL

COMPANY

ABOUT
PRODUCTS
TESTIMONIALS
BLOGS

CONTACT

CALL NOW
BOOK AN APPOINTMENT
Rapid@konifer.ca

PROJECTS

PROJECT 1

©2026. Konifer. All Rights Reserved.

Legal & Regulatory
Data Privacy & Security
Product & Technical Information
Whistle Blowing

Follow us on socials!